Dungeon Lab 6 mm Conductive Rubber Rings PRO

6 mm Conductive Rubber Rings PRO – Dungeon Lab

The highest quality conductive rubber rings on the market.

Made from custom-designed conductive rubber tubing, these rings are smooth, flexible, and easily adjustable to fit any girth thanks to the integrated cord locks. The inner diameter of the tube is specifically designed to accommodate standard 2 mm electrode pins, ensuring perfect compatibility with the COYOTE Power Box and other accessories.

Conventional conductive rubber typically has relatively high resistance, which can result in a weaker stimulation sensation. To overcome this, Dungeon Lab developed a custom low-resistance rubber compound combined with a conductive silver core. This innovation significantly reduces the resistance from several hundred ohms down to just a few dozen ohms.

This third-generation rubber ring introduces a new 6 mm diameter version. Compared to the 4 mm model, it provides a larger contact surface with the skin, delivering a more comfortable feel, although with a slight reduction in elasticity.

Each style of rubber ring offers its own unique tactile characteristics. Choose according to your personal preference. Using them together with a conductive lubricant can further enhance the pulse sensation.

The Dungeon Lab 6 mm Conductive Rubber Rings PRO feature conductive silver fibers integrated into the rubber tube along with a brass connector. Building upon the improved design, the brass connectors incorporate conductive silver fibers, resulting in even lower resistance and a softer, more comfortable ring body.

Usage Instructions

1. Rubber rings may vary slightly depending on the model. If the ring includes a tail bell, gently pull it outward slightly on one side before use.

2. The two electrode pins of the double-pin electrode cable must be inserted into two separate rubber rings. Do not insert both pins into the two ends of the same ring, as this will cause a short circuit.

3. Place the two rubber rings on the desired stimulation area, ensuring they do not touch each other. Maintain a gap of at least 1 cm between them.

4. After connecting to the pulse unit, always start with a low intensity setting to assess comfort before gradually increasing the level.

Precautions

1. Never insert both electrode pins into the two ends of the same rubber ring, and do not use a double-pin electrode cable to connect both ends of one ring.

2. Clean the product thoroughly before and after each use.

3. Conductive rubber rings are consumable items. Replace them immediately if you notice reduced conductivity, loss of elasticity, deformation, or cracking.